Description
Air Quality Monitor空氣質素監測器可以用於測量PM10濃度、PM2.5濃度、甲醛濃度及溫濕度，兼容Arduino、STM32等開發平台。
DFRobot Air Quality Monitor with PM 2.5, Formaldehyde, Temperature & Humidity Sensor, PMS5003ST
$747.00
空氣質素感測器 Air Quality Sensor
Out of stock
Additional information
| 套件內容 Kit Content | 1×Air Quality Monitor |
|---|---|
| 工作電壓 Operating Voltage | 5.0 Vdc |
| 有功電流 Active Current | 100 mA |
| 待機電流 Standby Current | ≤200 μA |
| 邏輯電平 Logic Level | 0.8 Vdc for digital low at 3.3 Vdc |
| 粒子直徑測量範圍 Particle Diameter Measuring Range | 0.3~1.0 μm |
| 粒子計量效率 Particle Counting Efficiency | 50 % for particle diameter 0.3 μm |
| 粒子重量測量範圍 Particle Weight Measuring Range | 0~500 μg/m^3 effective for PM2.5 |
| 粒子重量解析度 Particle Weight Resolution | 1 μg/m^3 |
| 粒子重量最大誤差 Particle Weight Maximum Error | ±10 μg/m^3 for 0~100 μg/m^3 |
| 粒子標準大小 Particle Standard Volume | 0.1 L |
| 甲醛重量測量範圍 Formaldehyde Weight Measuring Range | 0~1 μg/m^3 effective |
| 甲醛重量解析度 Formaldehyde Weight Resolution | 0.001 μg/m^3 |
| 甲醛重量最大誤差 Formaldehyde Weight Maximum Error | ±5 % |
| 溫度測量範圍 Temperature Measuring Range | -10~50 °C maximum |
| 溫度解析度 Temperature Resolution | 0.1 °C |
| 溫度最大誤差 Temperature Maximum Error | ±0.5 °C |
| 濕度測量範圍 Humidity Measuring Range | 0~99 % maximum |
| 濕度解析度 Humidity Resolution | 0.1 % |
| 濕度最大誤差 Humidity Maximum Error | ±2 % |
| 預設鮑率 Default Baud Rate | 9,600 bps |
| 總反應時間 Total Response Time | ≤10 s |
| 工作溫度 Operating Temperature | -10~60 °C |
| 工作濕度 Operating Humidity | 0~99 % |
| 故障前平均時間 MTTF | ≥3 years |
| 大小 Dimension | 50 mm×38 mm×21 mm |
| 重量 Weight | 50 g |
| 採用部件 Used Part | PlanTower digital universal particle concentration sensor PMS5003ST |
