Description
Auto-Calibrating Line Sensor循線感測器使用IR進行線條感測，並經Digital信號傳回線條位置。以此製作Arduino機械人的用家，可以直接透過2A Motor Driver Shield一次過連接此感測器及兩個直流摩打，減省Arduino機械人的製作時間及接駁煩惱。
Cytron Auto-calibrating Line Sensor, LSS05
$0.00
循線感測器 Line Following Sensor
Out of stock
Additional information
| 信號種類 Signal Type | Digital output |
|---|---|
| 工作電壓 Operating Voltage | 5 Vdc maximum |
| 電流消耗 Current Consumption | 20 mA maximum |
| 輸入信號電壓 Input Signal Voltage | 2~5 Vdc as high |
| 輸出信號電壓 Output Signal Voltage | 5 Vdc maximum |
| 信號電流 Signal Current | 20 mA |
| 測量距離 Measured Distance | 1~4 cm, 2 cm typical |
| 感測器 Sensor | 5×IR sensor with 940 nm peak wavelength |
| 用戶介面 User Interface | 1×Button for calibrating and selecting mode |
| 連接介面 Connection Interface | 1×Female 8-pin socket for power and output signal |
| 大小 Dimension | 64 mm×28 mm |
